For Clenaware Technical help, Parts & Sales call 01473 890129

TD 50 Installation

Siting Positioned on a sound and level surface with adequate clearance for servicing.

Electrical Refer to machine owners manual for electrical ratings.

Switched electrical outlet within 1 metre of the machine and accessible. Correctly fused. An RCD is recommended.

Water 3/4” BSB Bib Tap(s) within 1 metre of the machine and accessible.
Hot: 0.5 - 1.5 Bar @ 5lt/min (60°C Max)
Cold: 0.5 - 1.5 Bar @ 5lt/min (5°C Max)

Drain Washers: 11⁄2" upstand - minimum of 450mm up from base of the machine.

Dryer: Excess water can drain into an existing upstand or receptacle.

Chemicals Injected from external 5lt Rinseaid and Detergent Bottles via suction tubes. Use good quality chemicals.
Water Treatment For hard water supplies, the use of a suitable Water Softener or Water Filter must be installed.

Further details available on request.

Failure to comply with the installation requirements, cleaning procedures, or using the machine for purposes other than designed for, may invalidate the warranty.